Automatic Horse Waterers
PAS900D
The best engineered corner mount automatic waterer on the market.The PAS900D is easy to install, easy to care for and built to last with a housing or rustproof, heave-cast aluminum alloy. The drinking bowl is made of high impact industrial plastic that lifts out for easy cleaning; held in place by stainless steel spring clamps.
Operates quietly; won't disturb your horses. Nylon valve is corrosion-proof; works on water system pressures of 10 to 100 PSI. Valves are available for high pressures. Center position of drain plug permits easy cleaning.
Optional heater for PAS900D is the immersion type, 200 watt, 120 volt, 3-wire. Automatic snap-acting thermostat keeps water at 50 Fahrenheit. Controls are sealed in material impervious to moisture.
| Specifications | |
| Housing 6 - 1/2" H | Depth of Drinking Bowl: 5" |
| Housing Mat.: 1/4" alum. Alloy | Heater Capacity: 200 Watts |
| Housing Dia.: Projects out from corner 14 - 1/2" | Shipping Wt.: W/O heater 10 lbs. W/ heater 11 lbs. |
PAS7308D PAS799D
PAS 799D
Wall Bracket Kit for PAS7308D only
(fasteners included)
Shipping Wt. 7 lbs.
Double Duty
PAS 7308D
For stalls or pasture, the model 7308D mounts readily on 12" concrete pipe or on a poured concrete base. Handles up to 10 horses in pasture. 16" available.
Specifications:
Housing Dim.: 8" x 13"
Housing Mat.: Cast Alum. or Stainless Steel
13/Ga. 9"
Heater Cap: 250 watts
Ship. Wt.: Cast Alum. 29 lbs. - Stainless 28 lbs.
Shown with 789 Wall Bracket Kit Assembled
PAS73010D (Back-to-Back Model)
Same specifications as PAS7308WD except 10" flat back allows the joining of two units back-to-back.
300 Series
Rugged 8" or 24" high housing in economical aluminum alloy. Automatically provides cool fresh water in summer. Ice-free water in winter.. Easy to clean. No water waste. Install anywhere- indoors or outdoors. Recommended to be set in concrete pipe or base. One waterer serves up to 12 horses.
PAS3008D
Housing dim. 8" x13" Material - Alum Alloy
Heater Cap: 200 Watts
Shipping Wt. 14 lbs.
PAS30024D
Housing Dim - 24" x 13"
Material - Alum. Alloy
Heater Cap: 200 Watts
Shipping Wt. 24 lbs.
(Not Pictured)
PAS7308WD (Made for the Wall)
Provides easy access for plumbing and electrical hook up through the back of the housing or you may install the utilities through the bottom plate. The cast aluminum bottom comes with access opening to simplify utilities installation and is rounded at the edges for maximum safety and appearance.
Specifications
Housing Dim.: 8" x 13"
Housing Mat.: Cast Alum. or Stainless Steel 13 /Ga.
Overall Height: 9"
Heater Cap: 250 watts
Ship Wt. : Cast Alum. - 32 lbs. Stainless 30 lbs.
PAS73010D (Back-to-Back Model)
Same specifications as PAS7308WD except 10" flat back allows the joining of two units back-to-back.
Model PAS76024D
Perfect for Outside. The PAS76024D is designed for mounting on a concrete slab. Features same high capacity as the 7608D and has an extra-tall housing.Specifications
Housing Dim.: 24" x 16"
Housing Mat.: Cast Alum.
Overall Height: 25"
Heater Cap: 325 watts
Ship Wt. : 63 lbs.
Model PAS7608D
Delivers More Water. The PAS7608D can support up to 15 horses in pasture and can be installed easily in a 15" concrete pipe.
Specifications
Housing Dim.: 8" x 16"
Housing Mat.: Cast Alum. or Stainless Steel 13 /Ga.
Overall Height: 9"
Heater Cap: 325 watts
Ship Wt. : 34 lbs.
Installation Kit
Model RM603HKD
FEATURES
 | 100% assembled 16" length hose |
| Exclusive "spiral weave" hose gives added strength |
Specifications
1/8" male pipe thread one end
1/2" female pipe swivel
1/2" x 16" reinforced PVC hose all brass fittings
